Laminar Flow HEPA Filter 600mm x 600mm (24" x 24 ")
€395.00
This laminar flow HEPA filter is used to reduce the chances of airborne contamination.
The filter is used for building a laminar flow hood or as a replacement filter for an existing flow hood - 99.99% effective.
No more fumbling around in a still air box!
This laminar flow HEPA filter is essential for any mycology enthusiast, who want to have more space to move while working with mushrooms.
Terminal filtration for cleanroom applications used in mushroom labs and work areas to ensure clean air flow.
Reducing the chance of contamination while working on cultures, grow bags or agar plates.
This is a very high quality HEPA filter and will last for years. We suggest using a G4 grade pre filter with your blower fan to extend the life of your HEPA fiter.
We use a series of these exact same filters in our own lab and have never had issues with contamination.
The filters have been well tested and we are extremely happy with the results.
No more contaminated agar plates or grain bags! It makes mycology work very easy when doing grain to grain transfer, grain to bulk transfers or culture work.
High airflow Very low pressure drop Individual leak test on 0,3 µm at 0,45 m/s according to DIN 24.184 standard (from H13) MPPS individual efficiency test on 0,12 µm at 0,45 m/s (scanning test) according to EN1822 standard Individual scanning test cert delivered with the filter Double labeling for traceability Tested for food contact according to CE 1935/2004 Certified for microbial development (ISO 846-VD 6022)
GENERAL FEATURES
Efficiency EN1822: E10-U15 Media: Mini pleat micro fiberglass paper Frame: Extruded anodized aluminium Sealant: Polyurethane Separator: Continuous thermoplastic beads Gasket: Half-round monobloc polyurethane Grids: Painted epoxy (upstream and dowstream) Final pressure drop: 600 Pa Maximum T° in continuous service: 80°C Humidity: 70-80% RH
This laminar flow HEPA filter is used to reduce the chances of airborne contamination.
The filter is used for building a laminar flow hood or as a replacement filter for an existing flow hood - 99.99% effective.
No more fumbling around in a still air box!
This laminar flow HEPA filter is essential for any mycology enthusiast, who want to have more space to move while working with mushrooms.
Terminal filtration for cleanroom applications used in mushroom labs and work areas to ensure clean air flow.
Reducing the chance of contamination while working on cultures, grow bags or agar plates.
This is a very high quality HEPA filter and will last for years. We suggest using a G4 grade pre filter with your blower fan to extend the life of your HEPA fiter.
We use a series of these exact same filters in our own lab and have never had issues with contamination.
The filters have been well tested and we are extremely happy with the results.
No more contaminated agar plates or grain bags! It makes mycology work very easy when doing grain to grain transfer, grain to bulk transfers or culture work.
High airflow Very low pressure drop Individual leak test on 0,3 µm at 0,45 m/s according to DIN 24.184 standard (from H13) MPPS individual efficiency test on 0,12 µm at 0,45 m/s (scanning test) according to EN1822 standard Individual scanning test cert delivered with the filter Double labeling for traceability Tested for food contact according to CE 1935/2004 Certified for microbial development (ISO 846-VD 6022)
GENERAL FEATURES
Efficiency EN1822: E10-U15 Media: Mini pleat micro fiberglass paper Frame: Extruded anodized aluminium Sealant: Polyurethane Separator: Continuous thermoplastic beads Gasket: Half-round monobloc polyurethane Grids: Painted epoxy (upstream and dowstream) Final pressure drop: 600 Pa Maximum T° in continuous service: 80°C Humidity: 70-80% RH
